The APS028M series Hall effect rotary position sensor can perform angle monitoring in harsh transportation systems and industrial application environments. This product uses a Hall effect integrated circuit (IC) with magnetic bias to detect the rotational motion of the driver shaft within the working range. The rotation of the actuator shaft causes a change in the position of the magnet relative to the IC. The changes in magnetic flux density caused by the above are ultimately converted into linear output.
CANopen output - DS301 V402, supports encoder protocol DSP406V3.1
Radiation interference meets the EN 6100-6-4 standard, and noise immunity meets the EN6100-6-2 standard
Requirements for low temperature, anti-corrosion, vibration, environmental protection, etc
Control of lifting height for high-altitude work platforms
| Supply voltage: | current consumption | Electrical Angle | resolution |
| 8-35VDC | 15mA | Choose any angle | 12bit |
| output | linearity | repetitiveness | Minimum load resistance |
| voltages |
±1% FS |
±1% FS |
10KΩ |
| Flange size | shaft diameter | Mechanical Angle | Working life |
| 48x28x23mm | Ф6mm | 360 ° continuous | ≥ 10million times |
| Anti vibration | Impact | Protection level | Temperature range |
| Compliant with IEC 60068-2-64 |
Compliant with IEC 60068-2-27 test Ea |
IP65 |
-40℃~+85℃ |
APS028-Product Specification Sheet CN
Obtain materialsAPS028_Datasheet-EN
Obtain materials
Business Telephone：+86-021-54293326
Business Telephone：+86-021-54293326
Email address：sales@volbuff.com
Company Address：Building5,#118.Lane 2129,South Lianhua Road Shanghai 201108 ,China
Wechat official account
English
Consultation hotline：1895168888
Return list