The WEP series rope sensor is used to measure the working position of walking machinery. This sensor supports high-resolution encoders. Very suitable for workplaces that require high precision. The goal of WEP design is high reliability. Can resist the effects of extreme temperatures, vibrations, impacts, and typical EMI/RFI in the operating environment of walking machinery.
Sturdy shell, supports impact and vibration protection, and has high durability
CANopen output - DS301 V402, supports encoder protocol DSP406V3.1
Radiation interference meets the EN 6100-6-4 standard, and noise immunity meets the EN6100-6-2 standard
Requirements for low temperature, anti-corrosion, vibration, environmental protection, etc
| Power supply voltage | Current consumption | Measurement stroke | Linearity |
| 5-24VDC | ≤100mA | 0~1500mm | 0.2% |
| Precision | Electrical protection | EMC | Interface |
| 0.2° | Power reversal, output short circuit | EN61000-6-2, EN61000-6-4 |
CANopen |
| Rope box size | Material | Connect | Weight |
| 68.2mmx68.2mmx115mm | alumina | M12, 5pin | 200g |
| Reciprocating speed | Working life | Protection level | Operating Temperature |
| 1m/s | ≥ 2 million times |
IP65 |
-20℃~+85℃ |
WEP070A_Product Specification Book_CN
Obtain materialsWEP070A_Datasheet-EN
Obtain materials
Business Telephone：+86-021-54293326
Business Telephone：+86-021-54293326
Email address：sales@volbuff.com
Company Address：Building5,#118.Lane 2129,South Lianhua Road Shanghai 201108 ,China
Wechat official account
English
Consultation hotline：1895168888
Return list